What is acrylic glue? What are the characteristics of acrylic glue?

Since its launch, Acrylic Glue has been well received by consumers for its strong bonding ability and wide adaptability. Its environmentally friendly and low-toxic properties are also loved by many people. So what is acrylic glue , the use of acrylic glue and attention? What are the matters? I believe many people have a question in mind, then I will introduce to you what is the use of acrylic glue and acrylic glue, I hope this article can bring you some help and reference, let's take a look at it! 

Acrylic glue, also known as plexiglass glue, PMMA glue, sub-frame glue, acrylic glue, is widely used in the bonding of various organic materials. It is an indispensable material for many acrylic products, so the characteristics of acrylic glue are What? Let's take a look at it below.

Features of Acrylic Glue:

Wide range of applications, with excellent bonding results;

Very strong adhesion;

High temperature resistance, low temperature and high humidity;

Fast curing speed and improved work efficiency;

Not issued for a long time, unchanged white;

Heat resistance, no whitening, and good flexibility;

Suitable for automatic mechanical dispensing, convenient and fast.

Acrylic glue usage:

Docking

Place two butt plates on the platform, leaving a gap below 0.3mm width. Slowly symmetrical injection, until it is completely solidified.

2. Bonding of the facade

The bonded surface needs to be wiped clean to improve the bonding efficiency. If the thickness is within 3 mm, it can be injected with a syringe. If the thickness is more than 3mm, some fine metal wire can be padded to complete the bonding work.

3. Bevel bonding

The bevel should be at a 90 degree angle to prevent displacement.

Uniform slow bonding should be achieved when bonding.

The master can be removed after it has completely solidified.

4. Flat bonding

First wipe the sticky surface clean and ask for horizontal placement, and apply a proper amount of acrylic glue. Slowly put it down and slowly push the bubbles out.

Acrylic glue notes:

1. Please use stickers to protect the product.

2. Grease, air bubbles or dust should be cleaned before bonding.

3. If the amount is too small, it will bring in air.

4. No blowing is allowed. If the air blows, the glue will quickly evaporate and turn white.

5. Before fully curing, avoid direct sunlight to avoid yellowing of the product and affect the appearance.